# Table of Contents - [Introduction | Spoofing Database](#introduction-spoofing-database) - [Welcome | Spoofing Database](#welcome-spoofing-database) - [Maxio MAP1202 | Spoofing Database](#maxio-map1202-spoofing-database) - [Introduction | Spoofing Database](#introduction-spoofing-database) - [EFI Spoofing | Spoofing Database](#efi-spoofing-spoofing-database) - [VolumeID | Spoofing Database](#volumeid-spoofing-database) - [AFUWIN Method | Spoofing Database](#afuwin-method-spoofing-database) - [DMIEdit Method | Spoofing Database](#dmiedit-method-spoofing-database) - [Compatibility | Spoofing Database](#compatibility-spoofing-database) - [Reinstalling Windows | Spoofing Database](#reinstalling-windows-spoofing-database) - [VolumeID | Spoofing Database](#volumeid-spoofing-database) - [Introduction | Spoofing Database](#introduction-spoofing-database) - [Compatibility | Spoofing Database](#compatibility-spoofing-database) --- # Introduction | Spoofing Database ![Page cover](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2Fstatic-2c.gitbook.com%2F_next%2Fstatic%2Fmedia%2Fdefault-page-cover.a2ccd7e9.svg&width=1248&dpr=3&quality=100&sign=8db2ad43&sv=2) Permanent spoofing refers to a method where hardware IDs (HWIDs) are spoofed in such a way that the changes are permanent. This technique modifies the HWIDs at a deeper system level, ensuring that they persist even after system reboots or Windows reinstallation. It offers a long-term solution because the spoofed IDs remain intact, even after software updates or system restores. circle-check **Most of these methods work with Secure Boot and TPM enabled. To be sure, check the top of the method’s page to see if it specifies that it supports Secure Boot and TPM.** triangle-exclamation **To use these methods, you will need to reinstall Windows. Make sure to back up any important files from your hard drive beforehand.** [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/introduction#most-popular-methods) Most Popular Methods ----------------------------------------------------------------------------------------------------------------------------------------------------- [](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method) ![Cover](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FpiT8jztBXlRnrybeM5M8%252Fcolorful-pastel-blurry-gradient-blue-green-white-frosted-glass-effect-abstract-background.webp%3Falt%3Dmedia%26token%3D0a27f036-e14b-4628-96ca-7abcc6f3fa82&width=490&dpr=3&quality=100&sign=f9b9d7c&sv=2) **DMIEdit Method** This method works for all motherboards except ASUS and is the easiest way to spoof your HWID. 2[DMIEdit Method](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method) [](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method) ![Cover](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FAYaNju1tWAIbs88g5Ncm%252Fabstract-color-gradient-background.webp%3Falt%3Dmedia%26token%3Df15f0aab-3765-43f4-84fa-16d32c7a4b1a&width=490&dpr=3&quality=100&sign=da604b9b&sv=2) **AFUWIN Method** This method is specifically for ASUS users, but it can also be applied to any motherboard. 1[AFUWIN Method](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method) triangle-exclamation **If you have an ASUS motherboard, please flash your BIOS to a version prior to 2023. Make sure that your CPU is compatible with the chosen BIOS version, such as the Ryzen 7 5800X3D.** [PreviousReinstalling Windowschevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows) [NextAFUWIN Methodchevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method) Last updated 7 months ago --- # Welcome | Spoofing Database ![Page cover](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2Fstatic-2c.gitbook.com%2F_next%2Fstatic%2Fmedia%2Fdefault-page-cover.a2ccd7e9.svg&width=1248&dpr=3&quality=100&sign=8db2ad43&sv=2) Welcome to the Spoofing Database This is your ultimate resource for discovering and learning about all available methods for spoofing your HWID. Here, you’ll find a detailed collection of techniques, tools, and step-by-step guides to help you effectively spoof your hardware ID, bypass bans, and maintain privacy. Our goal is to provide accurate, up-to-date information on all spoofing methods, ensuring that you have everything you need to make informed decisions. Always remember to proceed with caution and understand the potential risks when using these techniques. This database is optimized for Valorant, but it can be used for any game and any anti-cheat system. ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs#jump-right-in) Jump right in [](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows) ![Cover](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FgH8sronB830HMo85P1rq%252Fpexels-photo-7130555.webp%3Falt%3Dmedia%26token%3D969d79b9-0ec0-4a46-be31-72c916ce1747&width=490&dpr=3&quality=100&sign=3dd6f7e&sv=2) #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs#undefined) bolt **Installing Windows** 0[Reinstalling Windows](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows) ![Cover](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FpiT8jztBXlRnrybeM5M8%252Fcolorful-pastel-blurry-gradient-blue-green-white-frosted-glass-effect-abstract-background.webp%3Falt%3Dmedia%26token%3D0a27f036-e14b-4628-96ca-7abcc6f3fa82&width=490&dpr=3&quality=100&sign=f9b9d7c&sv=2) #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs#undefined-1) star-christmas **Perm Spoofing** star-christmas[Perm Spoofing](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/introduction) ![Cover](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FAYaNju1tWAIbs88g5Ncm%252Fabstract-color-gradient-background.webp%3Falt%3Dmedia%26token%3Df15f0aab-3765-43f4-84fa-16d32c7a4b1a&width=490&dpr=3&quality=100&sign=da604b9b&sv=2) #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs#undefined-2) face-cowboy-hat **Temp Spoofing** face-cowboy-hat[Temp Spoofing](https://spoofing-database.gitbook.io/free-spoofing-database-docs/temp-spoofing/introduction) [NextCompatibilitychevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/compatibility) Last updated 3 months ago --- # Maxio MAP1202 | Spoofing Database triangle-exclamation This method only works with NVMe drives that use the Maxio MAP1202 controller. circle-info It is highly recommended to buy an NVMe drive with a Maxio MAP1202 controller if you plan to spoof your SSD serial number frequently. Here are some recommendations listed below. circle-exclamation It’s unclear whether this method works with Secure Boot and TPM enabled or disabled. However, after the spoofing process, it’s likely safe to re-enable both settings. [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/maxio-map1202#guide-how-to-spoof-your-serial-number-on-a-maxio-map1202-controller) Guide: How to Spoof your Serial Number on a Maxio MAP1202 Controller ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/maxio-map1202#step-0-purchase-an-ssd-if-you-dont-already-have-one) Step 0: Purchase an SSD (if you don't already have one). If you want to spoof your SSD s/n without a driver, think about getting a ssd with an Maxio MAP1202 Controller. I can give you some recommendations but choose yourself 1. Verbatim Vi3000: [Buyarrow-up-right](https://www.amazon.com/gp/product/B0BPJSL1XN/) 2. Fanxiang S500 Pro: [Buyarrow-up-right](https://www.amazon.com/fanxiang-NVMe-SSD-512GB-Enclosure/dp/B0DQ7V674J/ref=sr_1_13?sr=8-13) * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/maxio-map1202#step-0.5-prepare) Step 0.5: Prepare Now that you have your SSD, let’s begin by downloading the required tools. 1. Maxio MAP1202 Flashing Tool: [Downloadarrow-up-right](https://drive.google.com/file/d/1pRi0qFGJAdaDYECKKdlrh5DZ-yt1S16t/view?usp=sharing) 2. CrystalDiskInfo: [Downloadarrow-up-right](https://sourceforge.net/projects/crystaldiskinfo/files/latest/download) 3. NVMe to USB: [Buyarrow-up-right](https://www.amazon.com/ELUTENG-NVME-Adapter-M-2-Converter/dp/B0CB45PRMF/ref=sr_1_5?sr=8-5) (Optional) * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/maxio-map1202#step-1-set-everything-up) Step 1: Set Everything up 1. Open **CrystalDiskInfo** and take a screenshot of your original serial number. 2. Then open the **"map1202tool.zip",** and extract every file. 3. Now open **"MXMPTool\_MAP1202\_USB\_V0\_01\_009d.exe"** as an Administrator. 4. If everything was done correctly, your first entry should be highlighted in yellow. (see below) ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FYgi4wjAd5i3kLft3vdq2%252FAnnotation%25202025-08-08%2520010244.png%3Falt%3Dmedia%26token%3D37536f57-c4a8-4a1c-824c-268c0bf03b82&width=768&dpr=3&quality=100&sign=a5185b53&sv=2) * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/maxio-map1202#step-2-change-serials) Step 2: Change Serials If your first entry is highlighted in yellow, follow these steps: 1. Switch to the **"Test Items"** tab and copy my settings: ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252F7WRg3yHOMzON6zIqLtta%252FAnnotation%25202025-08-08%2520010544.png%3Falt%3Dmedia%26token%3D744d3cdc-2842-4c28-8ef8-9419e90fd679&width=768&dpr=3&quality=100&sign=770a785d&sv=2) 1. Now switch to the **"Device Setting"** tab and change your values: **Firmware Version:** Only numbers, max. 8 chars. **Model Number:** Only letters, max. 20 chars. **Serial Number:** Mix of letters and numbers, max. 13 chars 2. Switch back to the **"Main Page"** and press Start. If the spoof is successful, the entry will turn green and the status will change to **"Pass".** Restart your PC, or disconnect the NVMe-to-USB adapter and plug it back in. 3. Open **CrystalDiskInfo** and check your new serial number. [PreviousVolumeIDchevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/volumeid) Last updated 7 months ago --- # Introduction | Spoofing Database Temp Spoofing (Temporary Spoofing) is a method of changing your system’s hardware identifiers (HWID) only for the current session. These changes are not permanent and will be reset after a reboot. It's a safer and faster way to spoof your system, ideal for testing or avoiding detection without modifying your BIOS or system files permanently. triangle-exclamation **Most of these methods won’t work if Secure Boot and TPM are enabled.** **To be sure, check the top of the method’s page to see if it specifies that it supports Secure Boot and TPM.** circle-exclamation **Please note that these tutorials do not include steps for fully removing system traces. For optimal safety and effectiveness, a clean Windows reinstall is strongly recommended.** [PreviousEFI Spoofingchevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/efi-spoofing) [NextVolumeIDchevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/volumeid) Last updated 7 months ago --- # EFI Spoofing | Spoofing Database triangle-exclamation This method does not work with Secure Boot enabled. Make sure to disable it in your BIOS settings before proceeding. * * * [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/efi-spoofing#guide-how-to-spoof-your-hwid-using-a-efi-shell) Guide: How to spoof your HWID using a EFI Shell ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- circle-info Before spoofing, make sure to review your current serial numbers and take a screenshot of them. Once you've finished spoofing, you can go back and compare the values to verify that the changes were successfully applied. * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/efi-spoofing#step-0-prepare) Step 0: Prepare Before we begin spoofing, we first need get and install all the required tools: 1. EFI Spoofer: [Downloadarrow-up-right](https://drive.google.com/file/d/1t5Pvb93lT8t-8U5QymkIWssUOA3o1Rn-/view?usp=sharing) 2. HWID Checker: [Downloadarrow-up-right](https://drive.google.com/file/d/1-o5rMvjfbeTy9FN958zWBFInTor8PgYh/view?usp=sharing) 3. USB flash drive [Buyarrow-up-right](https://www.amazon.com/SanDisk-128GB-Ultra-Flash-Drive/dp/B081QSJNRJ/ref=sr_1_9?sr=8-9) After **downloading all the necessary tools**, proceed to **enter your BIOS** and adjust the **following settings:** 1. Disable Secure Boot and clear the Secure Boot keys 2. Enable CSM (Compatibility Support Module) 3. Disable Fast Boot Next you need to Format your USB flash drive to FAT32: 1. Right-click on your USB flash drive in File Explorer — in my case, it's named **"ESD-USB (D:)"**. 2. Now press the button called **"Format...".** 3. Under **"File system"** select **"FAT32"** 4. Now press **"Start"** and wait for the process to complete. * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/efi-spoofing#step-1-prepare-usb-flash-drive) Step 1: Prepare USB flash drive To change your serials, start by downloading the EFI Spoofer linked above. Extract the contents of the ZIP file to the **root directory** of your USB flash drive (see image below for reference). ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252Ff7TRYiv0jD2VKeB7u8Fo%252FAnnotation%25202025-08-05%2520223150.png%3Falt%3Dmedia%26token%3Df1270717-1253-4c95-b1f8-abe3fcda8715&width=768&dpr=3&quality=100&sign=15bc534d&sv=2) ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/efi-spoofing#step-2-change-serials) Step 2: Change Serials Go into the USB flash drive and do the following: 1. Open the folder **"efi"** and in the folder open the folder **"boot".** 2. Now open the file **"startup.nsh"** 3. Replace each instance of **"YOUR-SERIAL"** with your desired serial number. Refer to the image below for guidance. 4. Save everything and exit out #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/efi-spoofing#after-setting-up-your-usb-flash-drive-you-need-to-boot-from-it) After setting up your USB flash drive, you need to boot from it: 1. Enter your BIOS settings (if you're unsure how, search on YouTube: **"how to enter BIOS \[your motherboard brand\]"**). 2. Now go to the **"BOOT"** tab in your BIOS and set your USB drive as the first device in the boot order. If you're not sure how to do this, search on YouTube: **"how to change boot order \[your motherboard brand\]"**. 3. After that exit out of the BIOS ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/efi-spoofing#step-3-post-spoofing) Step 3: Post Spoofing Now that your Main Serial Numbers has been successfully spoofed, you can move on to other system identifiers, such as your **MAC address**, **Volume ID**, or **Disk Serial Number**. These values are often used by software and anti-cheat systems for hardware identification. I'll cover how to spoof each of these as well. So if there's already a dedicated page or section on these topics, feel free to go ahead and complete them next. [PreviousDMIEdit Methodchevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method) [NextIntroductionchevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/temp-spoofing/introduction) Last updated 7 months ago --- # VolumeID | Spoofing Database circle-check This method works with Secure Boot and TPM enabled! [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/volumeid#guide-how-to-change-your-hard-disk-volume-id) Guide: How to Change your Hard Disk Volume ID -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- * * * circle-info Before spoofing, make sure to review your current Volume ID and take a screenshot of it. Once you've finished spoofing, you can go back and compare the values to verify that the changes were successfully applied. * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/volumeid#step-0-prepare) Step 0: Prepare Before we begin changing our Volume ID, we need to gather all the necessary tools: 1. **VolumeID:** [Downloadarrow-up-right](https://download.sysinternals.com/files/VolumeId.zip) 2. **HWID Checker:** [Downloadarrow-up-right](https://drive.google.com/file/d/1-o5rMvjfbeTy9FN958zWBFInTor8PgYh/view?usp=sharing) * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/volumeid#step-1-setting-up-volumeid) Step 1: Setting up VolumeID After downloading VolumeID, we need to set it up properly to avoid errors. 1. Open the freshly installed **"Volumeid.zip"** and Drag-and-Drop the **"Volumeid.exe"** into a folder, and copy the path 2. Run Command Prompt as Administrator and navigate to the VolumeID folder using: `cd "path-to-VolumeID"` * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/volumeid#step-2-changing-serials) Step 2: Changing Serials Go into the already setuped Command Prompt and do the following: 1. **Type the following command:** `**volumeid.exe [drive letter]: XXXX-XXXX**` _Replace_ `_[drive letter]_` _with your actual drive (e.g., C) and_ `_XXXX-XXXX_` _with a valid ID using characters 0–9 and A–F._ 2. Now repeat the first step for each drive you have. [PreviousIntroductionchevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/temp-spoofing/introduction) [NextMaxio MAP1202chevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/maxio-map1202) Last updated 7 months ago --- # AFUWIN Method | Spoofing Database circle-check This method works with Secure Boot and TPM enabled, but for the spoofing process, please disable Secure Boot, as explained in the Tutorial. [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#guide-spoofing-your-hwid-using-afuwin-3.05.04) Guide: Spoofing your HWID using AFUWIN 3.05.04 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- * * * circle-info Before spoofing, make sure to review your current serial numbers and take a screenshot of them. Once you've finished spoofing, you can go back and compare the values to verify that the changes were successfully applied. ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#step-0-prepare) Step 0: Prepare To to this Method you will need: 1. **AFUWIN Version 3.04.05:** [Downloadarrow-up-right](https://drive.google.com/file/d/1HSmuRJe4CeLE6hz9lMW5I6ko3CiGnp9A/view?usp=sharing) 2. **HxD:** [Downloadarrow-up-right](https://mh-nexus.de/downloads/HxDSetup.zip) 3. **DMIEdit:** [Downloadarrow-up-right](https://drive.google.com/file/d/18azRZPhVHmrMIYUo9qGCvGv64k7UiodL/view?usp=sharing) 4. **HWID Checker:** [Downloadarrow-up-right](https://drive.google.com/file/d/1-o5rMvjfbeTy9FN958zWBFInTor8PgYh/view?usp=sharing) After **downloading all the necessary tools**, proceed to **enter your BIOS** and adjust the **following settings:** 1. Disable Secure Boot and clear the Secure Boot keys 2. Enable CSM (Compatibility Support Module) 3. Disable Fast Boot Once you have **successfully spoofed** your HWID, you can **revert these settings** to your **preferred configuration.** * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#step-1-dump-bios.rom) Step 1: Dump bios.rom First, unzip the AFUWIN tool, then open an Administrator Command Prompt and type the following: 1. `cd "the current AFUWIN path"` 2. `AFUWINx64.exe bios.rom /O` After typing these commands, you should see something like this appear: ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FemrDg3JxtR61RWf4gyse%252FAnnotation%25202025-08-05%2520192041.png%3Falt%3Dmedia%26token%3De74b8d08-5f1f-4503-9f70-945b169247eb&width=768&dpr=3&quality=100&sign=6a50dd3&sv=2) circle-exclamation During the BIOS reading and flashing process, you won't be able to move the mouse, and the sound may become very buggy. If everything went correctly, you should now have a `bios.rom` file in the AFUWIN directory. * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#step-2-setup-hxd-and-dmiedit) Step 2: Setup HxD and DMIEdit First, install HxD using the installer you downloaded earlier. Then, unzip DMIEdit and open both applications. #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#setting-up-hxd) Setting up HxD: 1. Drag and drop your `bios.rom` file into the grey area in HxD. 2. If your screen looks like the image below, you've done everything correctly. ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FXzlT80OyaIUnKI8XvoPG%252Fhxd.png%3Falt%3Dmedia%26token%3Daa867266-0f7e-4f4c-8646-e30aa69d60fb&width=768&dpr=3&quality=100&sign=8e9d8ac1&sv=2) * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#step-3-editing-your-serials) Step 3: Editing your Serials Start by launching DMIEdit. The first step will be to modify two key fields: the CPU Serial Number and the System Serial Number. These values are often required for system identification #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#system-serial-number) System Serial Number: 1. Go to **"\[Type 001\] — System Information"** 2. Double Click **"Serial Number"** and under **"String Value: xxx",** change your Serial Number 3. Next, click the icon that looks like a lightning bolt and is labeled 'All'. This will apply the changes you've made. #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#cpu-serial-number) CPU Serial Number: 1. Go to **"\[Type 004\] — Processor Information"** 2. Double Click **"Serial Number"** and under **"String Value: xxx",** change your Serial Number 3. Next, click the icon that looks like a lightning bolt and is labeled 'All'. This will apply the changes you've made. * * * Now we need to update the Motherboard Serial Number and the System UUID. These two fields are more complex to modify than the others, but they are also the most important serials for proper system identification. #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#system-uuid) System UUID: 1. Start by going into **"\[Type 001\] — System Information"** in DMIEdit 2. Double Click **"UUID"** 3. Copy your current UUID under "**Hexadecimal Value: xxx"** 4. Go into your configured HxD and press `CTRL + R` to replace 5. In the Replace Window select: **"Hex-values"** 6. In **"Search for: "** paste your current UUID 7. Go back to DMIEdit and press **"Auto Generates system UUID"** and copy your new UUID 8. Go back to HxD and in **"Replace with: "** paste your new UUID 9. Under **"Search direction"** select **"All"** and press **"Replace All"** 10. Press `CTRL + S` to save your new changes #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#motherboard-serial-number) Motherboard Serial Number: circle-exclamation Your new serial number must be the same length as the original. For example, if your old serial is 8 digits long, your new one must also be exactly 8 digits. Example: Old Serial: 12345678, New Serial: 87654321 1. Start by going into **"\[Type 002\] — Base Board/Module Information"** in DMIEdit 2. Double Click **"Serial Number"** and copy your current Serial Number 3. Go into HxD with your bios.rom loaded and press `CTRL + R` to replace 4. in the Replace Window select: "Text-string" 5. In **"Search for: "** paste your current Serial Number 6. In **"Replace with: "** type a new Serial Number the same length as the old one (see above) 7. Under **"Search direction"** select **"All"** and press **"Replace All"** 8. Press `CTRL + S` to save your new changes * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#step-4-flash-your-new-bios.rom) Step 4: Flash your new bios.rom After you've successfully modified all necessary serial numbers, the next step is to flash the updated BIOS to your system. This process is essential, as it applies the changes you've made by writing them directly to the system firmware. Without flashing, the new serials will not be stored permanently and your system will continue to use the old values. Flashing the BIOS essentially overwrites the existing firmware with the modified version, ensuring that your changes — such as the CPU Serial Number, System UUID, and Motherboard Serial Number — are properly saved and recognized by the system during startup. circle-exclamation For the next step, you'll need to use a specific version of AFUWIN: **version 3.05.04**. This is crucial because it's the only known version that includes support for the `/GAN` command, which is required to force-flash the modified BIOS onto your system. Start by opening a Administrator Console Prompt and type in the following commands: 1. `cd "your current AFUWIN directory"` 2. `AFUWINx64.exe bios.rom /GAN` You will see something like this if you did everything right: ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FKFQVYlSCzQc5Kkuf0UtV%252Fasdasda.png%3Falt%3Dmedia%26token%3Dcb1bdf58-eaa8-4120-9c99-61cf9587a98c&width=768&dpr=3&quality=100&sign=352825fb&sv=2) If you followed all the steps correctly, the flashing process should complete successfully and display a message such as **"done"**. This indicates that your modified BIOS has been written to the system. ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method#step-5-post-spoofing) Step 5: Post Spoofing Now that your BIOS has been successfully spoofed, you can move on to other system identifiers, such as your **MAC address**, **Volume ID**, or **Disk Serial Number**. These values are often used by software and anti-cheat systems for hardware identification. I'll cover how to spoof each of these as well. So if there's already a dedicated page or section on these topics, feel free to go ahead and complete them next. circle-check You can now restore your original BIOS settings if you wish. This includes any custom configurations you had before flashing, such as Secure Boot, Secure Boot Keys, CSM and Fast Boot. [PreviousIntroductionchevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/introduction) [NextDMIEdit Methodchevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method) Last updated 7 months ago --- # DMIEdit Method | Spoofing Database circle-check This method works with Secure Boot and TPM enabled, but for the spoofing process, please disable Secure Boot, as explained in the Tutorial. circle-exclamation This method will most likely not work on ASUS motherboards or any motherboard with strong read/write protection. [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method#guide-spoofing-your-hwid-using-dmiedit) Guide: Spoofing your HWID using DMIEdit -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- * * * circle-info Before spoofing, make sure to review your current serial numbers and take a screenshot of them. Once you've finished spoofing, you can go back and compare the values to verify that the changes were successfully applied. * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method#step-0-prepare) Step 0: Prepare Before we begin spoofing, we first need to install all the required tools: 1. DMIEdit: [Downloadarrow-up-right](https://drive.google.com/file/d/18azRZPhVHmrMIYUo9qGCvGv64k7UiodL/view?usp=sharing) 2. HWID Checker: [Downloadarrow-up-right](https://drive.google.com/file/d/1-o5rMvjfbeTy9FN958zWBFInTor8PgYh/view?usp=sharing) After **downloading all the necessary tools**, proceed to **enter your BIOS** and adjust the **following settings:** 1. Disable Secure Boot and clear the Secure Boot keys 2. Enable CSM (Compatibility Support Module) 3. Disable Fast Boot Once you have **successfully spoofed** your HWID, you can **revert these settings** to your **preferred configuration.** * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method#step-1-change-serials) Step 1: Change Serials We’re going to change several key serials, including the System UUID, System Serial Number, Processor Serial Number, and Motherboard Serial Number. However, DMIEdit allows you to modify much more — so don’t be afraid to explore and see what else you can customize. #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method#system-uuid) System UUID: 1. Go to **"\[Type 001\] — System Information"** 2. Double Click **"UUID"** and click **"Auto Generates system UUID",** then hit **"OK".** 3. Next, click the icon that looks like a lightning bolt and is labeled 'All'. This will apply the changes you've made. #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method#system-serial-number) System Serial Number: 1. Go to **"\[Type 001\] — System Information"** 2. Double Click **"Serial Number"** and under **"String Value: xxx",** change your Serial Number 3. Next, click the icon that looks like a lightning bolt and is labeled 'All'. This will apply the changes you've made. #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method#cpu-serial-number) CPU Serial Number: 1. Go to **"\[Type 004\] — Processor Information"** 2. Double Click **"Serial Number"** and under **"String Value: xxx",** change your Serial Number 3. Next, click the icon that looks like a lightning bolt and is labeled 'All'. This will apply the changes you've made. #### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method#motherboard-serial-number) Motherboard Serial Number: 1. Go to **"\[Type 002\] — Baseboard/Module Information"** 2. Double Click **"Serial Number"** and under **"String Value: xxx",** change your Serial Number 3. Next, click the icon that looks like a lightning bolt and is labeled 'All'. This will apply the changes you've made. * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/dmiedit-method#step-2-post-spoofing) Step 2: Post Spoofing Now that your BIOS has been successfully spoofed, you can move on to other system identifiers, such as your **MAC address**, **Volume ID**, or **Disk Serial Number**. These values are often used by software and anti-cheat systems for hardware identification. I'll cover how to spoof each of these as well. So if there's already a dedicated page or section on these topics, feel free to go ahead and complete them next. circle-check You can now restore your original BIOS settings if you wish. This includes any custom configurations you had before flashing, such as Secure Boot, Secure Boot Keys, CSM and Fast Boot. [PreviousAFUWIN Methodchevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/afuwin-method) [NextEFI Spoofingchevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/efi-spoofing) Last updated 7 months ago --- # Compatibility | Spoofing Database circle-info **Supported Windows Versions** Windows 10: All Versions Windows 11: All Versions - Does not come preinstalled with wmic circle-exclamation **Supported Motherboards** GIGABYTE: Supported - Not tested MSI: Supported - Not tested ASUS: Supported - Tested on B550-A GAMING ASRock: Supported - Not tested circle-check **Tested Motherboards** ASUS ROG STRIX B550-A GAMING ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/compatibility#tested-methods) Tested Methods: Mobo AFUWIN DMIEdit EFI VolumeID Maxio MAP1202 ASUS ROG STRIX B550-A GAMING ✔ ❌ ✔ ✔ ❔ [PreviousWelcomechevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs) [NextReinstalling Windowschevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows) Last updated 7 months ago --- # Reinstalling Windows | Spoofing Database [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#guide-step-by-step-tutorial-on-reinstalling-windows-correctly) Guide: Step-By-Step Tutorial on Reinstalling Windows Correctly ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- triangle-exclamation All important files on your USB and your current Windows installation will be wiped. Be sure to back up any important files. ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#what-you-will-need) ✔ What you will need: * A **USB flash drive** with at least **8 GB** of free space * A **Windows PC with internet access** * The **Media Creation Tool** from Microsoft [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#step-0-preparing-the-usb-flash-drive) Step 0: Preparing the USB flash drive -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1. Plug in your **USB flash drive** 2. **Backup any Important files** - the drive will be **erased** during the preparation * * * [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#step-1-download-the-media-creation-tool) Step 1: Download the Media Creation Tool -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1. Visit the **official Microsoft page**: * **Windows 10**: [Linkarrow-up-right](https://www.microsoft.com/software-download/windows10) * **Windows 11**: [Linkarrow-up-right](https://www.microsoft.com/software-download/windows11) 2. Under **"Create Windows 10 or 11 installation media"** click **"Download Now"**. 3. Save the tool to your computer. * * * [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#step-2-creating-the-bootable-usb-drive) Step 2: Creating the Bootable USB Drive ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 1. **Run** the Media Creation Tool. 2. **Accept** the license terms. 3. Select **"Create installation media (USB flash drive, DVD, or ISO file) for another PC",** then click **Next.** 4. Choose your preferences: * **Language** * **Edition** (Windows 10 or 11) * **Architecture** (64-bit is most common) 5. Select **"USB flash drive"** and hit **Next.** 6. **Pick your USB stick** from the list and then hit **Next.** 7. The Media Creation Tool will **download Windows** and **prepare the USB drive** for reinstallation. The process **may take some time**, depending on your **internet speed**. * * * [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#step-3-reinstalling-windows-standart-sata-nvme-setup) Step 3: Reinstalling Windows (Standart SATA/NVMe Setup) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 1. Go into **settings** and go onto **"Update & Security"** then onto **"Recovery"** 2. Now under **"Advanced startup"** click **"Restart now"** 3. Now click **"Use a device"** and select your USB flash drive from the list ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FizBGV4IHUYb4srWBRUiH%252Fimage.avif%3Falt%3Dmedia%26token%3D9dd5ecf4-c557-471a-931a-7c8e35fd1bf1&width=768&dpr=3&quality=100&sign=47207bb8&sv=2) triangle-exclamation **If you don't see your USB drive here, or if you boot back into Windows, do the following:** 1. Go into your **BIOS** 2. Go to the **"BOOT"** tab 3. Go change the **"BOOT option #1"** to your USB. 1. Now, in the **Windows installation**, under **"Language to Install"** select your **desired language**. The rest will be **automatically selected** for you. 2. Click **"Install Now"** and when prompted to **enter an activation key**, click **"I don't have a product key"** ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252Fu2RyIWFbDfED4zKRIIdH%252Fimage%2520%281%29.avif%3Falt%3Dmedia%26token%3D18d916c6-c4db-4fb2-8552-912ed9352d95&width=768&dpr=3&quality=100&sign=4b1b796b&sv=2) 3. When prompted to **select a Windows version**, choose **Windows 10 or 11 Pro.** ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252Fn2fXQWRbMRlJEZcUzkHG%252Fimage.png%3Falt%3Dmedia%26token%3Dfd27368e-8936-409a-9d96-330459c42ae1&width=768&dpr=3&quality=100&sign=f1e484f5&sv=2) 4. After selecting the version, you'll be **prompted to choose between upgrading or performing a custom install**. Select **"Custom: Install Windows only (advanced)".** ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FJORHutWUnqi0u86mGWt7%252Fimage%2520%281%29.png%3Falt%3Dmedia%26token%3Deecac5a7-620f-47a9-ace6-8e38eddd41a3&width=768&dpr=3&quality=100&sign=7546d370&sv=2) 5. Now on the screen where you want to **partition your disks**, on your keyboard press **SHIFT + F10** ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FpdtzLiprJQJ32avLpPva%252Fwin10_install-9.webp%3Falt%3Dmedia%26token%3D7cbd3ae1-cf88-4940-84f4-e922eeae9b39&width=768&dpr=3&quality=100&sign=2758af0b&sv=2) 6. **In the console**, type this **command**: `diskpart` 7. Type `list disk` and **select the disk** with the **most GB**, or the one where you know your **game is installed**. 8. Then type `select disk x` , and replace the **"x"** with the **number of your disk** 9. Now type `clean` ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252F0Kpu9UfR348ecv8J6Egt%252Fimage%2520%282%29.png%3Falt%3Dmedia%26token%3D43150e66-a403-469d-8461-399cb3a9173f&width=768&dpr=3&quality=100&sign=58905933&sv=2) 10. **Exit** out of the **console** and **follow the rest of the Windows Setup** * * * [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#step-3.5-reinstalling-windows-raid-setup) Step 3.5: Reinstalling Windows (RAID Setup) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#step-0-before-you-start-ensure-you-have) Step 0: Before you start, ensure you have: 1. Windows 10 or 11 installation media (USB created with Media Creation Tool). 2. RAID drivers for your motherboard: * **Intel**: Usually called `Intel Rapid Storage Technology (IRST)` * **AMD**: Usually called `AMD RAIDXpert2` * Download from your motherboard or system manufacturer's website. 3. A **USB flash drive** with the **RAID drivers extracted** into a folder ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#step-1-windows-setup) Step 1: Windows Setup 1. **Follow all the steps** listed above up to **step 8**. ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#step-2-load-raid-drivers) Step 2: Load RAID Drivers When asked "Where do you want to install Windows?", your RAID volume might not appear yet. To fix this problem, do this: 1. Click on **"Load driver"**. ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2F4106604860-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FhaLdsYZWMtYUliMbBzss%252Fuploads%252FDH0NmbZDkFeJFUs0LcIu%252F20230420150600769_EN_12.png%3Falt%3Dmedia%26token%3Dbdd41c06-8a79-49a8-879d-c1b1cbb32f7d&width=768&dpr=3&quality=100&sign=36354495&sv=2) 2. Click **Browse**, and then go to your **USB with the RAID drivers**. ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2Fkm-ap.asus.com%2Fuploads%2FPhotoLibrarys%2F8a53fc79-6a00-4a96-8408-a7e886967aef%2F20230420150600769_EN_14.png&width=768&dpr=3&quality=100&sign=43b19717&sv=2) 3. Select the correct driver (usually labeled as _Intel RAID Controller_ or _AMD RAID Controller_) and click **Next**. ![](https://spoofing-database.gitbook.io/free-spoofing-database-docs/~gitbook/image?url=https%3A%2F%2Fkm-ap.asus.com%2Fuploads%2FPhotoLibrarys%2F8a53fc79-6a00-4a96-8408-a7e886967aef%2F20230420150601097_EN_15.png&width=768&dpr=3&quality=100&sign=bbb22651&sv=2) 4. **Continue** following the steps from the **standard Windows installation.** * * * [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows#post-install-tips) Post-Install Tips ----------------------------------------------------------------------------------------------------------------------------------------- * After a successful Windows Installation, go install the chipset and RAID drivers again from your motherboard's site. * Check if RAID is working, by opening the Device Manager and confirming your RAID controller is listed. [PreviousCompatibilitychevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/compatibility) [NextIntroductionchevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/introduction) Last updated 7 months ago --- # VolumeID | Spoofing Database circle-check This method works with Secure Boot and TPM enabled! [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing#guide-how-to-change-your-hard-disk-volume-id) Guide: How to Change your Hard Disk Volume ID ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- * * * circle-info Before spoofing, make sure to review your current Volume ID and take a screenshot of it. Once you've finished spoofing, you can go back and compare the values to verify that the changes were successfully applied. * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing#step-0-prepare) Step 0: Prepare Before we begin changing our Volume ID, we need to gather all the necessary tools: 1. **VolumeID:** [Downloadarrow-up-right](https://download.sysinternals.com/files/VolumeId.zip) 2. **HWID Checker:** [Downloadarrow-up-right](https://drive.google.com/file/d/1-o5rMvjfbeTy9FN958zWBFInTor8PgYh/view?usp=sharing) * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing#step-1-setting-up-volumeid) Step 1: Setting up VolumeID After downloading VolumeID, we need to set it up properly to avoid errors. 1. Open the freshly installed **"Volumeid.zip"** and Drag-and-Drop the **"Volumeid.exe"** into a folder, and copy the path 2. Run Command Prompt as Administrator and navigate to the VolumeID folder using: `cd "path-to-VolumeID"` * * * ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing#step-2-changing-serials) Step 2: Changing Serials Go into the already setuped Command Prompt and do the following: 1. **Type the following command:** `**volumeid.exe [drive letter]: XXXX-XXXX**` _Replace_ `_[drive letter]_` _with your actual drive (e.g., C) and_ `_XXXX-XXXX_` _with a valid ID using characters 0–9 and A–F._ 2. Now repeat the first step for each drive you have. [PreviousIntroductionchevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/temp-spoofing/introduction) [NextMaxio MAP1202chevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/maxio-map1202) Last updated 7 months ago --- # Introduction | Spoofing Database Temp Spoofing (Temporary Spoofing) is a method of changing your system’s hardware identifiers (HWID) only for the current session. These changes are not permanent and will be reset after a reboot. It's a safer and faster way to spoof your system, ideal for testing or avoiding detection without modifying your BIOS or system files permanently. triangle-exclamation **Most of these methods won’t work if Secure Boot and TPM are enabled.** **To be sure, check the top of the method’s page to see if it specifies that it supports Secure Boot and TPM.** circle-exclamation **Please note that these tutorials do not include steps for fully removing system traces. For optimal safety and effectiveness, a clean Windows reinstall is strongly recommended.** [PreviousEFI Spoofingchevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs/perm-spoofing/efi-spoofing) [NextVolumeIDchevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/disk-spoofing/volumeid) Last updated 7 months ago --- # Compatibility | Spoofing Database circle-info **Supported Windows Versions** Windows 10: All Versions Windows 11: All Versions - Does not come preinstalled with wmic circle-exclamation **Supported Motherboards** GIGABYTE: Supported - Not tested MSI: Supported - Not tested ASUS: Supported - Tested on B550-A GAMING ASRock: Supported - Not tested circle-check **Tested Motherboards** ASUS ROG STRIX B550-A GAMING ### [hashtag](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing#tested-methods) Tested Methods: Mobo AFUWIN DMIEdit EFI VolumeID Maxio MAP1202 ASUS ROG STRIX B550-A GAMING ✔ ❌ ✔ ✔ ❔ [PreviousWelcomechevron-left](https://spoofing-database.gitbook.io/free-spoofing-database-docs) [NextReinstalling Windowschevron-right](https://spoofing-database.gitbook.io/free-spoofing-database-docs/pre-spoofing/windows) Last updated 7 months ago ---